Der Blätterkatalog benötigt Javascript.
Bitte aktivieren Sie Javascript in Ihren Browser-Einstellungen.
The Blätterkatalog requires Javascript.
Please activate Javascript in your browser settings.
66 Error list Errors Possible cause Solution The screen is off The system is not receiving power Plug the power adapter into the outlet Check the cable for damage The screen is not receiving power Check whether the power cable is properly connected to the screen Check the power cable that connects to the screen for damage The screen is defective Replace the screen The RFID card cannot be identified The card is either defective or not programmed Try using a different card The card is potentially defective or not programmed The card reader is not working Check whether the cable is properly connected Check the cable for damage Replace the card reader The lock does not open The lock cannot be controlled Check the emergency release Check the cable for damage and check if it is connected properly The lock is defective Replace the lock No connection to the service center SIM card Check whether the SIM card is inserted properly Check whether sufficient reception is available at the installation site Replace the SIM card 11 Disassembly shutdown disposal 11 1 Disassembly Heed the warnings mentioned in chapter 2 “Basic safety instructions” to avoid damage to the cabinet and injuries 11 2 Shutdown and storage Here you will find information that you must pay attention to if you need to pause the operations of the system for an extended period of time and what you should remember when you resume operation of the hazardous materials cabinet after this period The hazardous materials cabinet must be stored in a dry place The room should always be sufficiently ventilated to reduce humidity For recommissioning it must be ensured that the hazardous materials cabinet has the correct operating temperature between 15 and 40 degrees Celsius before switching it on 11 3 Recommissioning after shutdown Follow this operating manual for recommissioning as well Keep it close to the stocked system 11 4 Decommissioning Follow the safety instructions given below Disconnect the system from the power supply The basic safety instructions are also applicable refer chapter 2 “Basic safety instructions” and the instructions from the documentation of the supplier